Chapter 4 – Functions of the instrument
UM-23100B-U User manual ATEQ F CLASS Page 59/90
2.6. LIGHTING THE SCREEN
Screen illumination can be programmed and modified. The lighting can be adjusted
according to the ambient conditions or the user's choice.
There are three lighting modes:
9 continous mode, display screen permanently lit whatever the conditions
9 manual mode, the screen remains lit for 20 minutes and if the keyboard has not
been used by the end of this period the screen shuts down and only relights when
the keyboard is touched again.
9 automatic mode, which is identical to manual mode, with illumination of the
screen also if an action is carried out from the external inputs (rear connectors)
Using these three modes, the lighting intensity of the screen can be programmed from
00 (screen off) to 07 (maximum lighting intensity).
In the main menu, position the
cursor by the
CONFIGURATION
menu then confirm by pressing
ENTER.
MAIN MENU
PARAMETERS
SPE CYCLE: Disabled
CONFIGURATION
Move the cursor down until it is in
front of the
ECLAIRAGE menu then
confirm by pressing
ENTER.
CONFIGURATION
PRINTER : No
SECURITY : No
LIGHT
Place the cursor in front of MODE to
choose the required lighting mode
and confirm using
ENTER.
CONFI/LIGHT
MODE :CONTINOU
INTENSITY : 04
Select the lighting mode and confirm
using
ENTER.
CONFI/LIGHT/MODE
CONTINOUS
MANUAL
AUTO
To return to the previous menu,
press the
C button once
C
CONFI/ECLAIRAGE
MODE :PERMANEN
INTENSITE: 07
To select the lighting intensity for the
display, place the cursor in front of
the
INTENSITE menu and confirm
using
ENTER.
CONFI/LIGHT
MODE :CONTINOU
INTENSITY : 04
Then select the lighting intensity
from 00 (off) to 07 (maximum
luminosity) and the new lighting
intensity will be applied as soon as
ENTER is pressed.
To Next Page
Loading...