ATEQ F SERIES - Chapter 7 OPERATIONAL PROBLEMS; Phenomenon Noted

Chapter 4 – Functions of the instrument
UM-23100B-U User manual ATEQ F CLASS Page 73/90
7.1. STANDBY USING THE MENU
Standby using the menu enables start and stop times for the instrument to be
programmed.
In the main menu, position the
cursor beside STANDBY and
confirm by pressing ENTER.
MAIN
MENU
RESULTS
LANGUAGE : English
STAND-BY
To program automatic standby at a
given time, position the cursor
beside STOP TIME.
STAND
-
BY
Now :No
Pow-on time :No
Pow-off time :No
Confirm the STOP TIME parameter
using YES
VEILLE
Now :No
Pow-on time :No
Pow-off time :Yes
Then set parameters for the time
(hours and minutes) when the
standby must take effect. "TIME
DELAY" is the delay (in minutes)
between the programmed time and
actual standby
STAND
/
P
ow
-
off
t
i
me
HOUR : 00
MINUTE : 00
Delay : 00
To program the start-up time for the
instrument, position the cursor
beside START TIME
STAND
-
BY
Now :No
Pow-on time :Yes
Pow-off time :Yes
Confirm the START TIME
parameter using YES
VEILLE
Now :No
Pow-on time :Yes
Pow-off time :Yes
Then set parameters for the
instrument start time (in hours and
minutes).
STAND
/
P
ow
-
o
n
t
i
me
HOUR : 00
MINUTE : 00