8. Release History and Known issues
8.1. Firmware Release History
Table 8-1. Public Firmware Revisions
Firmware version (decimal) Date Relevant changes
1.36 29.09.2016 Added support for UPDI interface
(tinyX devices)
Made USB endpoint size
configurable
1.28 27.05.2015 Added support for SPI and
USART DGI interfaces.
Improved SWD speed.
Minor bug fixes.
1.22 03.10.2014 Added code profiling.
Fixed issue related to JTAG daisy
chains with more than 64
instruction bits.
Fix for ARM reset extension.
Fixed target power led issue.
1.13 08.04.2014 JTAG clock frequency fix.
Fix for debugWIRE with long
SUT.
Fixed oscillator calibration
command.
1.09 12.02.2014 First release of Atmel-ICE.
8.2. Known Issues Concerning the Atmel-ICE
8.2.1. General
• The initial Atmel-ICE batches had a weak USB connector. A new revision has been made with a
new and more robust USB connector. As an interim solution epoxy glue has been applied to the
already produced units of the first version to improve the mechanical stability.
8.2.2. Atmel AVR XMEGA OCD Specific Issues
• For the ATxmegaA1 family, only revision G or later is supported
Atmel Atmel-ICE [USER GUIDE]
Atmel-42330C-Atmel-ICE_User Guide-10/2016
57
To Next Page
Loading...
Need help?
General
