9. Product Compliance
9.1. RoHS and WEEE
The Atmel-ICE and all accessories are manufactured in accordance to both the RoHS Directive
(2002/95/EC) and the WEEE Directive (2002/96/EC).
9.2. CE and FCC
The Atmel-ICE unit has been tested in accordance to the essential requirements and other relevant
provisions of Directives:
• Directive 2004/108/EC (class B)
• FCC part 15 subpart B
• 2002/95/EC (RoHS, WEEE)
The following standards are used for evaluation:
• EN 61000-6-1 (2007)
• EN 61000-6-3 (2007) + A1(2011)
• FCC CFR 47 Part 15 (2013)
The Technical Construction File is located at:
Atmel Norway
Vestre Rosten 79
7075 Tiller
Norway
Every effort has been made to minimise electromagnetic emissions from this product. However, under
certain conditions, the system (this product connected to a target application circuit) may emit individual
electromagnetic component frequencies which exceed the maximum values allowed by the
abovementioned standards. The frequency and magnitude of the emissions will be determined by several
factors, including layout and routing of the target application with which the product is used.
Atmel Atmel-ICE [USER GUIDE]
Atmel-42330C-Atmel-ICE_User Guide-10/2016
59
To Next Page
Loading...
Need help?
General
