Audi conn e ct
"' Select and confirm Ent er PIN.
"' Enter the PIN for your SIM card.
"'Select and confirm
OK.
"'To connect to the Internet automatically in the
future, select and then confirm
Yes.
"' Confirm the system prompt asking to connect
to the Internet with either
Yes, connect once or
Yes, always if required.
After conn ecting successfull y
After connecting successfully, the signal strength
and connection type are displayed in the Info-
tainment system status line @ /@ c>
page 104,
fig. 105 .
You can now use Audi connect.
The list of available Audi connect services is dis-
played in the Infotainment system display.
Remov ing th e SIM card
"' Press on the mini SIM card briefly. The card is
released from the slot. Remove the mini SIM
card.
(UJ Note
- Audi connect is des igned for use only with
the provided SIM card. Audi AG is not liable
for the consequences of using other SIM
cards.
- To avoid damaging the SIM card reader, on-
ly use mini SIM cards (25 mm x 15 mm)
c> fig. 115 . Contact your cell phone service
provider for more information on mini SIM
cards.
- If a SIM card of a different size is inserted in
the SIM card reader instead of a mini SIM
card, do not under any circumstances re-
move th is card yourself due to the risk of
damag ing the SIM card reader . Contact your
authorized Audi dea ler or authorized Audi
Service Facility.
- There is a risk of damagi ng the SIM card
reade r if you use a SIM card adapter, be-
cause vibrations can cause the SIM card to
fall out of the adap ter while driving.
124
(D Tips
- You can connect a cell phone with Bluetooth
(handsfree) to make phone calls
i=> page 113.
- Audi does not provide support for other SIM
cards. Audi recommends using only the pro-
vided SIM card.
- You can specify when the MMI connects to
the Internet c> page 128. The Internet con-
nection disconnects automat ically once the
requested Audi connect service no longer re-
quires any data packets.
Configuration through
myAudi
Activating/configuring specific Audi
connect services
Applies to vehicles with Audi connect
Some Audi connect services must be activated/
configured through your personal myAudi ac-
count before using them for the first time.
- If you do not have a personal myAudi account
yet , you can register on line at my.audiusa.com.
- Add your vehicle to your myAudi account .
- Activate/configure the Audi connect services
you would like for your vehicle in your myAudi
account .
- For some Audi connect services, you may also
have to enter your myAudi user data or your
myAudi PIN when accessing services in the MMI
to connect your vehicle t o myAudi.
For detailed configuration information, see
my.audiusa .com.
Logging into myAudi in the vehicle
Applies to vehicles with Audi connect
To use some Audi connect services (such as Twit-
ter*), you must first connect your vehicle with
myAudi to transfer your personal settings from
your myAudi account.
"' Select: !ME N UI button> Audi connect > right
cont rol button >
Log in.
"' Enter your myAudi user data . Or: enter your 8-
digit myAudi PIN. ...
To Next Page
Loading...
