....
N
a:
CX)
....
I.Cl
U"I
N
I.Cl
....
Easy seat entry
Easy seat entry makes it easier to get into the
back seats .
Fig. 47 Driver's seat: loop oh the seat backrest
~
To fold the front seat backrests forward, pull
on the loop and fold the seat backrest.
A WARNING
Always make sure the front seats are upright
and securely locked in place when driving.
Center armrest
Applies to: vehicles with center arm rest
Fig. 48 Armrest between the driver's/front passenger's
seats.
~
To adjust the angle, raise the armrest c:> fig. 48
notch by notch.
~
To bring the armrest back down, raise it out of
the top notch and fold it back down. Then lift
the armrest to the desired position, if necessa-
ry.
Please note that the driver's ability to move his or
arm may be restricted when the armrest is folded
down. Because of this, the armrest should not be
folded down during city driving.
Seats and storage
The armrest can slide forward and back.
There is a storage compartment under the arm-
rest.
Rear bench seat
Rear seat passengers must meet certain criteria.
Fig. 49 Correct seated position on the rear bench seat
_&. WARNING
- The rear bench seat may only carry persons
with a height of up to 4 feet 9 inches (57 in/
1.45
m).
- At the same time, the minimum distance
between the head and the rear window
when sitting upright should not be less than
1 inch (2.5 cm) . Taller people could suffer
severe injuries when closing the luggage
compartment lid or during a collision. Al-
ways pay attention to the rear passengers
when closing the luggage compartment lid.
- No heavy, hard objects may be placed on the
luggage compartment cover. They endanger
the vehicle passengers when opening the
luggage compartment lid or when braking
suddenly.
49
To Next Page
Loading...
