AudioCodes C450HD - Configuring a Conference; Table 5-35: Conference Parameters

Administrator's Manual 5. Configuring VoIP Settings
Version 3.4.3 101 400HD Series IP Phones
Parameter Description
voip/line/0-5/call_forward/type
Determines the condition on which incoming calls are
forwarded to another destination:
 Unconditional - incoming calls are forwarded
independently of the status of the line.
 Busy - incoming calls are forwarded only if the
phone is busy.
 No_Reply (default) - incoming calls are forwarded
only if the phone does not answer before a user-
defined timeout.
voip/line/0-5/call_forward/timeout
If calls are forwarded when the condition is No-Reply,
then this parameter defines the time (in seconds) after
which incoming calls are forwarded when this is no
reply. Range:0 - 7200. Default: 6.
voip/line/0-5/call_forward/destination
The destination to which the call is directed when call
forward is activated.
 To configure call forwarding using the phone's screen:
 See the User's Manual for detailed information.
5.8.4 Configuring a Conference
Three-way conferencing can be configured.
 To configure three-way conferencing:
• Use the table as reference.
Table 5-35: Conference Parameters
Parameter Description
voip/services/conference/mode
Sets the conference mode (when establishing 3-
Way Conference).
LOCAL = phone will establish the conference by
itself.
REMOTE = phone will use remote media server to
establish the conference.
voip/services/conference/conf_ms_addr Relevant only if 'Mode'(above) is REMOTE.
Defines the media server for establishing remote
conference.
For more information on this feature, see RFC 4579, Session Initiation Protocol (SIP) - Call
Control - Conferencing for User Agents.