Administrator's Manual 5. Configuring VoIP Settings
Version 3.4.3 119 400HD Series IP Phones
5.9 Configuring Volume Levels
The network administrator can configure volume levels such as gain control and tone
volume.
5.9.1 Configuring Gain Control
Automatic Gain Control can be configured.
Note: It's strongly advisable not to change the Automatic Gain Control parameter values.
Consult with your AudioCodes representative if you require any modification.
5.9.2 Configuring Tone Volume
Tone volume can be configured.
Note: It's strongly advisable not to change the default values.
To configure tone volume:
• Use the table as reference.
Table 5-57: Tone Volume Parameter
Parameter Description
voip/audio/gain/tone_signal_level
Call Progress Tone volume. This volume can be modified
on-the-fly by pressing the phone's VOLUME key in certain
scenarios.
The valid range is 1 to 31 (-dB).
The default value is 2.
To Next Page
Loading...
