EasyManua.ls Logo

AudioCodes C450HD - Configuring OPUS Management; Table 5-28: OPUS Management Parameters

AudioCodes C450HD
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrator's Manual 5. Configuring VoIP Settings
Version 3.4.3 95 400HD Series IP Phones
5.5.5 Configuring OPUS Management
Note: Currently applies to the 405HD, 430HD and 440HD low-end phones, the 450HD
high-end phone and the HRS conference device. Support pending on the other models.
OPUS management for enhanced voice quality allows the OPUS audio codec's configuration
to be changed on the fly when impairments are detected in the network. The OPUS functions
at a lower channel bit rate and consumes less bandwidth, delivering better voice quality
despite the poor network conditions. OPUS management can be configured using
configuration file.
To configure OPUS management:
Use the table as reference.
Table 5-28: OPUS Management Parameters
Parameter Description
voip/voice_quality/mode
Enables OPUS management and extended OPUS
management for enhanced voice quality.
DISABLE (default)
ENABLE_RTCP
ENABLE_RTCP_FEEDBACK

Table of Contents

Other manuals for AudioCodes C450HD

Related product manuals