AudioCodes C450HD - Figure A-7: Broadsoft Server - Shared Call Appearance Add

Administrator's Manual A. Configuring Phones in Server-Specific Deployments
Version 3.4.3 191 400HD Series IP Phones
Figure A-7: BroadSoft Server – Shared Call Appearance Add
Table A-5: BroadSoft Server - Shared Call Appearance Add
Parameter Description
Identity/Device Profile Name See BroadSoft's documentation for detailed information.
From the dropdown, select the Identity/Device Profile Type
you configured previously.
Line/Port
Enter the required SIP register address-of-record, for
example (shown in the figure above):
2421114099@as.iop1.broadworks.net
Enable this location Select this option to enable this user station.
Allow Origination from this location
Select this option to allow calls to be made from this user
station.
Allow Termination to this location
Select this option to allow calls to be received at this user
station.
 To configure shared line using the configuration file:
• Use the table as reference.
Table 10-6: Shared Line Parameter
Parameter Description
voip/line/0-5/line_mode Change the default from PRIVATE to SHARED.