AudioCodes C450HD - 5.8.15 Configuring the Ringers Default Audio Device; Table 5-46: Configuring the Ringers Default Audio Device

400HD Series IP Phones
Administrator's Manual 110 Document #: LTRT-11973
5.8.15 Configuring the Ringer’s Default Audio Device
The network administrator can configure the ringer’s default audio device.
 To configure the ringer’s default audio device:
• Use the table as reference.
Table 5-46: Configuring the Ringer’s Default Audio Device
Parameter Description
audio/stream/ringer/0/audio_device
Determines which device rings when a call comes in.
Valid values are:
 TYPE_SPEAKER
 BUILTIN_SPEAKER (default)
 USB_SPEAKER
 BLUETOOTH_SPEAKER (applies to the 445HD
and C450HD phones only)
 TYPE_HEADSET
 USB_HEADSET
 BLUETOOTH_HEADSET
 TYPE_USB
 TYPE_BLUETOOTH
 ANALOG