AudioCodes C450HD - Configuring Voice Quality Monitoring; Table 9-3: Voice Quality Monitoring Parameters

400HD Series IP Phones
Administrator's Manual 176 Document #: LTRT-11973
9.6.2 Configuring Voice Quality Monitoring
Network administrators can set up the phone to report SIP PUBLISH messages to a remote
QoE server.
 To configure voice quality monitoring:
• Use the table as reference.
Table 9-3: Voice Quality Monitoring Parameters
Name Role
voip/qoe/qoe_publish_enabled
Determines whether or not to send PUBLISH messages
(Default-0).
voip/qoe/qoe_server_address
Sets the QoE server address/hostname to which PUBLISH
messages will be sent (Default-0.0.0.0).
voip/qoe/qoe_server_port
Sets the port to which the PUBLISH messages will be sent
(Default-5060).
For a full lising of RTCP XR parameters that may be sent to the QoE server, see Appendix
G.
For example SIP PUBLISH messages, see Appendix H.