Administrator's Manual 6. Configuring Phone Settings
Version 3.4.3 129 400HD Series IP Phones
Parameter Name Description
system/ldap/call_lookup
Performs an LDAP search during call (search the
display name for a number).
system/ldap/country_code
Defines the country code prefix added for number
search.
system/ldap/area_code
Defines the area code prefix added for number
search.
system/ldap/minimal_name_search_length
Starts to perform an LDAP search after x
characters are input.
system/ldap/send_queries_while_typing
Sends an LDAP search each time the user
presses a key (all keys with both number and
letters).
6.1.1.2 Loading a Text-based Corporate Directory File
The Configuration file can include a link to a user-defined Corporate Directory file, using the
'provisioning/corporate_directory_uri' parameter. This allows you to upload a corporate
directory to the phone.
Three types of corporate directory files are supported: txt, cfg, and xml
The corporate directory file includes a list of contacts and their phone numbers.
The syntax of the corporate directory file must be as follows:
<full name>,<office>,<home>,<mobile>
For example:
John Smith,1234,98765432,574685746
If not all phone numbers are required, the relevant field must be left empty. For example, in
the directory entry below, the home and user-defined numbers are absent:
John Smith,1234,,574685746
To configure the Corporate Directory:
• Use the table as reference.
Table 6-2: Provisioning Parameters
Parameter Description
provisioning/corporate_directory_uri
The URI for retrieving the corporate directory. The
corporate directory must be included in a separate file to
be loaded to the phone during provisioning.
For example:
provisioning/corporate_directory_uri=corporate_dir.txt
Note:
The corporate directory file is loaded after boot up and
after that, periodically.
If the corporate directory file is new, the phone updates
the information and does not reboot.
To Next Page
Loading...
