400HD Series IP Phones
Administrator's Manual 102 Document #: LTRT-11973
5.8.5 Configuring Automatic Dialing
Automatic Dialing can be configured.
To define Automatic Dialing:
• Use the table as reference.
Table 5-36: Automatic Dialing Parameters
Parameter Description
voip/dialing/auto_dialing/enabled
Determines whether automatic dialing is enabled (i.e.,
phone number is automatically dialed when you off-
hook the phone).
0 Disable (default)
1 Enable
voip/dialing/auto_dialing/timeout
Timeout (in seconds) before automatic dialing occurs
after the phone is off-hooked. When set to 0,
automatic dialing is performed immediately.
The valid range is 0 to 120. The default value is 15.
voip/dialing/auto_dialing/destination
The number that is automatically dialed when the
phone is off-hooked.
The valid value can be up to 32 characters.
To Next Page
Loading...
