AudioCodes C450HD - Configuring Barge-In; Table 6-11: Barge-In Parameters

Administrator's Manual 6. Configuring Phone Settings
Version 3.4.3 141 400HD Series IP Phones
6.4.1 Configuring Barge-in
When barge-in is disabled (default), users who're in regular calls when a paging call comes
in are prompted in their phone screens to accept or reject the paging call. If they accept, the
regular call is put on hold and the paging call is heard. If they reject, the regular call is
continued and the paging call goes unheard.
Note: The prompt to accept or reject a paged call is only relevant to users who're in
regular calls. If they're not in regular calls, the prompt is displayed irrespective of whether
barge-in is disabled or enabled.
When barge-in is enabled, paging calls interrupt (barge in on) regular calls in progress,
without prompting users with an option to accept or reject the paging call.
 To enable barge-in:
• Use the table as reference.
Table 6-11: Barge-in Parameters
Parameter Description
voip/services/group_paging/allow
_barge_in/enabled
Enables paging to interrupt (i.e., barge into) regular calls
currently in progress.
 0 Disabled (default)
 1 Enabled
Note: See the phone's User's Manual for examples.