AudioCodes C450HD - Configuring SIP Reject Code; Table 5-10: Reject Code Parameter

400HD Series IP Phones
Administrator's Manual 74 Document #: LTRT-11973
5.1.7 Configuring SIP Reject Code
Reject Code can be configured.
 To configure Reject Code:
• Use the table as reference.
Table 5-10: Reject Code Parameter
Parameter Description
voip/services/reject_code
Configures the reject code that the phone sends when the
Reject softkey is pressed or while DND is activated.
Valid values are:
CODE_603
CODE_486