AUMA ACV 01.2 User Manual

S
Safety instructions 9
Safety instructions/warnings 9
Selection overview for output
contacts and indication lights
151
Selector switch functions 92
Self-retaining 13
Self-retaining local 32
Self-retaining Remote 33
Service 35
Service functions 124
Setpoint control (Remote
SETPOINT)
65
Setpoint - indication on dis-
play
21
Setpoint source - process
controller
70
Set speed range 51
Signal behaviour (multiport
valve)
122
Signal loss 85
Signal output units (AOUT) 47
Signals 27
Signals (analogue) 28
Signals - configurable 28
Simulation 132
Slave address 74
Source (PVST) 99
Speed: set 50
Speed (failure behaviour) 86
Speed (PVST) 101
Speed change 51
Speed functions 49
Speed profile 53
Speed reduction (before end
positions)
52
Speed reduction (positioner) 64
Speed setpoint 49
Speed source 49
Speed source - process con-
troller
72
Split Range operation 67
Standards 9
Start of stepping mode 74
Status menu 15
Status signals 27
Status signals - configurable 28
Stepping mode 72
Stepping mode: by-pass 90
Stop step 74
Switching off for reaction time
error
110
T
Target configuration 126
Temperature (motor) 140
Temperature indication 143
Temperature monitoring 112
Temperature-time character-
istic
139
Temperature unit 45
Thermal monitoring 107
Time 44
Time for speed increase 51
Timeout 17
Torque (histogram) 141
Torque by-pass 105, 105
Torque - indication on display 21
Torque limitation 106
Torque monitoring 105
Torque seating 36
Torque switching 37, 38
Torque switching: by-pass 90
Torque-travel characteristic 136
Torque unit 45
Torque warning 105
Two-wire control 60
Type of seating for end posi-
tions
36
U
User level 16
V
Valve position - indication on
display
20
Verification of sub-assemblies 113
W
Warnings - indication on dis-
play
22
Working value units (AIN) 47
162
Actuator controls
Index ACV 01.2/ACVExC 01.2 Profibus DP

AUMA ACV 01.2 Specifications

General

Brand	AUMA
Model	ACV 01.2
Category	Controller
Language	English