AUMA ACV 01.2 User Manual

Read operation instructions first.
●
Observe safety instructions.
Purpose of the document:
This document contains information for the commissioning, operation and maintenance staff. It is intended to
support local device operation and setting modifications.
Reference documents:
●
Operation instructions (Assembly, operation, commissioning) for actuator.
●
Manual (Device integration Fieldbus) actuator controls AC 01.2 Profibus DP
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
91. Safety instructions.................................................................................................................
91.1. Prerequisites for the safe handling of the product
101.2. Range of application
101.3. Warnings and notes
101.4. References and symbols
122. Short description...................................................................................................................
133. Operation................................................................................................................................
133.1. Operating the actuator from local controls
133.2. Actuator operation from remote
143.3. Menu navigation via push buttons (for settings and indications)
153.3.1. Menu layout and navigation
163.4. User level, password
163.4.1. Password entry
173.4.2. Password change
173.4.3. Timeout for incorrect password entry
183.5. Language in the display
183.5.1. Language change
194. Indications..............................................................................................................................
194.1. Indications during commissioning
194.2. Indications in the display
204.2.1. Feedback signals from actuator and valve
224.2.2. Status indications according to AUMA classification
234.2.3. Status indications according to NAMUR recommendation
254.3. Indication lights of local controls
254.3.1. Indication lights: change colour
275. Signals (output signals).........................................................................................................
275.1. Signals via fieldbus
275.2. Status signals via output contacts (digital outputs)
275.2.1. Assignment of outputs
275.2.2. Coding the outputs
285.3. Configurable status signals
285.4. Analogue signals (analogue outputs)
285.4.1. Assignment of analogue output 1
2
Actuator controls
Table of contents ACV 01.2/ACVExC 01.2 Profibus DP

AUMA ACV 01.2 Specifications

General

Brand	AUMA
Model	ACV 01.2
Category	Controller
Language	English