AS1635-MT-EN-03
p. 19/46
5. MAINTENANCE INTERFACE
5.1. presentation
The Maintenance interface allows you to log on directly to the AS 1635 logic circuit board (USB or Ethernet link) in order to
configure it, monitor its operating status and perform diagnostic and maintenance operations.
This is a resident tool, available as standard in the CPU of the circuit board, and does not require any additional software to
install it.
For an Ethernet connection, however, it is necessary to fit the plug-in AS1622 Ethernet adapter onto the AS1635 motherboard
(optional).
The interface is accessible from any individual computer station or network via a simple web browser (no internet connection
required).
You can use one of the following browsers:
Firefox
Internet Explorer
(Version 11 and later)
Edge
Safari
Opera
Chrome
We would recommend that you use the Firefox or Chrome browsers.
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose other
than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The
document is subject to change without notice.
To Next Page
Loading...
