AS1635-MT-EN-03
p. 6/46
2. GENERAL SYMBOLS
The following symbols are used in this manual or as labels on the equipment:
This symbol is used to highlight a tip that may help you to better understand the product.
This symbol is used to highlight an important instruction for the correct use and/or maintenance of the product.
This symbol is used to highlight a risk of electric shock or electrocution.
This symbol is used to highlight a risk of cutting yourself.
This symbol is used to identify the ground connection point.
(Either in the form of an affixed label or directly engraved on a mechanical part)
13
This symbol is used to indicate the tool to be used for the relevant operation.
This symbol indicates that the equipment conforms to European standards and directives.
This symbol indicates that the equipment must be disposed of in accordance with the applicable European
Directives (DEEE 2012/19/EU).
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose other
than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The
document is subject to change without notice.
To Next Page
Loading...
