Avaya 9600 Series Configuring

DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
21 of 51
SM6-1_CMES
4. Configure Avaya Aura® Session Manager
This section describes the procedures for configuring Avaya Aura® Session Manager to support
registrations of SIP endpoints.
These instructions assume other administration activities have already been completed such as
defining SIP entities for each Session Manager, defining the network connection between
System Manager and each Session Manager, and defining Communication Manager as a
Managed Element. For more information on these additional actions, see References [2] and [5]
in Section 9.
The following administration activities will be described:
 Define SIP Domain and Locations
 Define SIP Entity for Communication Manager Evolution Server
 Define Entity Links, which describe the SIP trunk parameters used by Session Manager
when routing calls between SIP Entities
 Define Entity Link between Session Managers
 Define Routing Policies and Dial Patterns which control routing between SIP Entities
 Define Applications and Application Sequences supporting SIP Users
 Add new SIP Users
 Synchronize changes with Communication Manager.
Note: Some administration screens have been abbreviated for clarity.
Configuration is accomplished by accessing the browser-based GUI of Avaya Aura® System
Manager, using the URL “http://<ip-address>/SMGR”, where “<ip-address>” is the IP
address of Avaya Aura® System Manager. Log in with the appropriate credentials.

Avaya 9600 Series Specifications

General

Brand	Avaya
Model	9600 Series
Category	IP Phone
Language	English