Avaya 9600 Series Configuring

DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
47 of 51
SM6-1_CMES
6.3. Call Scenarios Verified
Verification scenarios for the configuration described in these Application Notes included the
following call scenarios:
Basic Calls:
 Place a call from a SIP endpoint to other SIP stations or to other non-SIP stations.
Answer the call and verify talk path.
 Place a call from a SIP endpoint to other SIP stations or to other non-SIP stations.
Answer the call and place the call on Hold. Return to the held call and verify talk path.
 Verify calls can be transferred from a SIP endpoint to other SIP stations or to other non-
SIP stations.
 Verify calls can be forwarded from a SIP endpoint to other SIP stations or to other non-
SIP stations.
 Verify that a SIP endpoint can create a conference with other SIP endpoints and non-SIP
stations.
 Repeat the above scenarios with calls originating from non-SIP stations on
Communication Manager Evolution Server to SIP endpoints.
Failure Scenarios:
 Change Management State of the primary Session Manager to “Deny New Service”.
o Verify a SIP endpoint can still make calls to other SIP stations or to non-SIP
stations. Answer the calls and verify talk path.
o Verify a SIP endpoint can still make calls to other SIP stations or to non-SIP
stations. Answer the call and place the call on Hold. Return to the held call and
verify talk path.
 During an active call, disable network connectivity to primary Session Manager.
o Verify talk path on the active call after the failover. Disconnect the call and
verify the call is properly cleared.
o Verify talk path on the active call after the failover. Place the call on Hold.
Return to the held call and verify talk path.
o During failover, verify a SIP endpoint can still make calls to another station
(including both SIP and non-SIP stations). Answer the call and verify talk path.
o During failover, verify a SIP endpoint can still make calls to another station
(including both SIP and non-SIP stations). Answer the call and place the call on
Hold. Return to the held call and verify talk path.
 Disable the SIP trunk between Communication Manager and the primary Session
Manager.
o Verify a SIP endpoint can still make calls to other SIP stations or to non-SIP
stations. Answer the calls and verify talk path.
o Verify a SIP endpoint can still make calls to other SIP stations or to non-SIP
stations. Answer the call and place the call on Hold. Return to the held call and
verify talk path
 Repeat the above scenarios with calls originating from non-SIP stations on
Communication Manager Evolution Server to a SIP endpoint.

Avaya 9600 Series Specifications

General

Brand	Avaya
Model	9600 Series
Category	IP Phone
Language	English