DJH Reviewed:
SPOC 07/08/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
44 of 51
SM6-1_CMES
6.2. Verify Avaya Aura® Communication Manager Operational
Status
Verify the status of one of SIP trunk groups on Communication Manager Evolution Server by
using the status trunk n command, where n is one of the trunk group numbers administered in
Section 3.6.2.
Verify that all trunks in the trunk group are in the “in-service/idle” state as shown below:
status trunk 10
TRUNK GROUP STATUS
Member Port Service State Mtce Connected Ports
Busy
0010/001 T00006 in-service/idle no
0010/002 T00007 in-service/idle no
0010/003 T00008 in-service/idle no
0010/004 T00009 in-service/idle no
0010/005 T00014 in-service/idle no
0010/006 T00015 in-service/idle no
0010/007 T00043 in-service/idle no
0010/008 T00044 in-service/idle no
0010/009 T00045 in-service/idle no
0010/010 T00046 in-service/idle no
Verify the status of one of the SIP signaling groups by using the status signaling-group
command, where n is one of the signaling group numbers administered in Section 3.6.1.
Verify the signaling group is “in-service” as indicated in the Group State: field shown below:
status signaling-group 10
STATUS SIGNALING GROUP
Group ID: 10 Active NCA-TSC Count: 0
Group Type: sip Active CA-TSC Count: 0
Signaling Type: facility associated signaling
Group State: in-service
To Next Page
Loading...
Need help?
General
