Parameter Description
PHY2STAT Controls the secondary Ethernet interface speed. The default is 1 for auto-negotiate.
PROCPSWD Security string used to access local procedures. The default is 27238.
PROCSTAT Controls whether local procedures are enabled. The default is 0 for enabled.
REUSETIME Time in seconds for IP address reuse timeout, in seconds. The default is 60 seconds.
SIG The signaling protocol download flag that indicates the protocol applied as follows:
• 0 for Default
• 1 for H.323
• 2 for SIP
SIP_CONTR
OLLER_LIST
SIP proxy or registrar server IP or DNS addresses that can be 0 to 255 characters, IP
address in the dotted decimal name format, separated by commas and without any
intervening spaces. The default is null, that is, no controllers.
TLSDIR Used as path name that is prepended to all file names used in HTTPS GET operations
during initialization. The string length can be from 0 to 127.
TLSPORT Destination TCP port used for requests to https server in the range of 0 to 65535. The
default is 443, the standard HTTPS port.
TLSSRVR IP addresses or DNS names of Avaya file servers used to download configuration files.
Firmware files can also be downloaded using HTTPS.
Note:
Transport Layer Security is used to authenticate the server.
VLANTEST Number of seconds to wait for a DHCPOFFER on a non-zero VLAN. The default is 60
seconds.
DHCP site-specific option
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 33
Comments on this document? infodev@avaya.com
To Next Page
Loading...
