Configuring the Avaya Aura
®
Web Gateway on Avaya
Aura
®
Device Services
About this task
Use this procedure to add the Avaya Aura
®
Web Gateway FQDN to the Avaya Aura
®
Device
Services trusted hosts and to verify HTTP client settings.
For more information about Avaya Aura
®
Device Services, see the following documents:
• Deploying Avaya Aura
®
Device Services
• Administering Avaya Aura
®
Device Services
Procedure
1. On the Avaya Aura
®
Device Services web administration portal, navigate to Server
Connections > Trusted Hosts and click Add.
2. In Host, type the Avaya Aura
®
Web Gateway FQDN.
Important:
Avaya Aura
®
Device Services requires the FQDN or IP address for each Avaya Aura
®
Web Gateway cluster node added to the Avaya Aura
®
Device Services trusted hosts
list. Avaya Aura
®
Device Services also requires the FQDN or IP address of the Avaya
Aura
®
Web Gateway cluster.
3. On the HTTP Clients tab, ensure that the REST and OAMP options are not set to NONE.
If these options are set to NONE, then the trusted host relationship between the Avaya
Aura
®
Web Gateway and Avaya Aura
®
Device Services will not work. The Avaya Aura
®
Web Gateway will also not be able to communicate with Avaya Aura
®
Device Services.
Uploading clients to the web deployment service
About this task
Use this procedure to upload Windows and MacOS clients to the web deployment service.
For Avaya Equinox
®
for Windows, you can upload .exe or .msi installation files. For Avaya
Equinox
®
for Mac, you can upload .dmg installation files, which are packaged in a .zip archive.
Note:
This procedure applies to Team Engagement and Conferencing deployments. This document
does not describe the Conferencing-only deployment model.
For more information about web deployment client installers, see Administering Avaya Aura
®
Device Services.
System Manager, Avaya Aura
®
Device Services, Media Server, and Avaya Equinox Conferencing configurations
October 2018 Deploying the Avaya Aura
®
Web Gateway 104
Comments on this document? infodev@avaya.com
To Next Page
