Avaya Aura - Certificate setup; Creating a certificate signing request on Avaya Session Border Controller for Enterprise

5. To add a flow for Avaya Equinox
®
Management, do the following:
a. Navigate to Device Specific Settings > End Point Flows > Server Flows and then
select Add.
b. In Flow Name, provide a name for the flow.
For example: EqMngFlow.
c. From Server Configuration, select the Avaya Equinox
®
Management configuration
that you created in step 3.
d. From Received Interface, select the internal A1 interface.
e. From Signaling Interface, select the internal A1 interface.
f. From Media Interface, select the internal A1 interface.
g. From End Point Policy Group, select required.
6. To add a flow for the Avaya Aura
®
Web Gateway, do the following:
a. Navigate to Device Specific Settings > End Point Flows > Server Flows and then
select Add.
b. In Flow Name, provide a name for the flow.
For example: AAWGFlow.
c. From Server Configuration, select the Avaya Aura
®
Web Gateway configuration that
you created in step 4.
d. From Received Interface, select the internal A1 interface.
e. From Signaling Interface, select the internal A1 interface.
f. From Media Interface, select the external B1 interface.
g. From End Point Policy Group, select required.
Certificate setup
The following sections describe how to configure certificates.
Creating a certificate signing request on Avaya Session Border
Controller for Enterprise
Procedure
1. Log in to the Avaya SBCE web administration interface.
2. Navigate to TLS Management > Certificates.
Certificate setup
October 2018 Deploying the Avaya Aura
®
Web Gateway 135
Comments on this document? infodev@avaya.com