6. Select Apply and Continue for the specified certificates to be processed.
7. Select Exit Configure to exit this menu.
Adding third-party root CA certificates to the Avaya Aura
®
Web Gateway
About this task
Use this procedure to trust additional root CAs. For example, you can add the:
• LDAP root CA certificate if you are using a secure LDAP connection.
• SIP CA certificate if Session Manager has certificates signed by the SIP CA.
You can manage truststore certificates by using the Avaya Aura
®
Web Gateway administration
portal as described in Administering the Avaya Aura
®
Web Gateway.
Do not use this procedure to add the System Manager root CA certificate because that was
already added during the initial installation.
Procedure
1. Run the following command to open the configuration utility:
app configure
2. Select Add a Certificate to the TrustStore.
3. To add a certificate, select Certificate file and specify the path to the file.
4. Select Apply.
If the provided file contains certificate chain, then all certificates will be added to the
truststore.
Creating a Certificate Signing Request (CSR) using
OpenSSL
About this task
Use this procedure to generate a CSR using OpenSSL.
You can also generate a CSR using the Avaya Aura
®
Web Gateway web administration portal.
Before you begin
Ensure that you have the OpenSSL utility.
Adding third-party root CA certificates to the Avaya Aura
®
Web Gateway
October 2018 Deploying the Avaya Aura
®
Web Gateway 151
Comments on this document? infodev@avaya.com
To Next Page
Loading...
