Avaya Aura - Appendix A: Certificate configuration using the configuration utility; Generating Certificate Signing Requests

Appendix A: Certificate configuration using
the configuration utility
The following sections describe how to configure certificates using the configuration utility process.
You can also manage and update certificates using the Avaya Aura
®
Web Gateway web
administration portal. For more information about working with the web administration portal, see
Administering the Avaya Aura
®
Web Gateway.
Important:
The web administration portal is the preferred method for managing certificates. Use the
configuration utility process to configure certificates for troubleshooting purposes, but after this
is done, perform certificate management from the web administration portal when possible.
Generating Certificate Signing Requests
About this task
Use this procedure to generate a Certificate Signing Request (CSR).
Important:
You must use this procedure if you are not using System Manager as the only Certificate
Authority (CA) to sign certificates for all solution components.
Before you begin
Ensure that Avaya Aura
®
Web Gateway is successfully installed with System Manager signed
certificates. This is the default setting for installation.
Procedure
1. Run the following command:
sudo mkdir /opt/Avaya/AAWGportalCerts
sudo chmod 770 /opt/Avaya/AAWGportalCerts
The system creates an AAWGportalCerts directory in /opt/Avaya/ for the output of
the script that will generate the CSRs.
October 2018 Deploying the Avaya Aura
®
Web Gateway 148
Comments on this document? infodev@avaya.com