Avaya Aura - TLS client and server profiles setup; Creating a TLS server profile; Creating a TLS client profile; Configuring Avaya SBCE network interfaces

TLS client and server profiles setup
Creating a TLS server profile
Procedure
1. Log in to the Avaya SBCE web administration portal.
2. Navigate to TLS Management > Server Profiles.
3. Click Add.
4. In Profile Name, enter a name for the profile.
5. In Certificate, select the installed CA certificate that you want to associate with the profile.
6. Complete the remaining fields as required and then click Next.
7. Select the required TLS versions and then click Finish.
The system displays the new profile on the Server Profile page.
Creating a TLS client profile
Procedure
1. Log in to the Avaya SBCE web administration portal.
2. Navigate to TLS Management > Client Profiles.
3. Click Add.
4. In Profile Name, enter a name for the profile.
5. In Certificate, select the installed CA certificate that you want to associate with the profile.
6. Complete the remaining fields as required and then click Next.
7. Select the required TLS versions and then click Finish.
The system displays the new profile on the Client Profile page.
Configuring Avaya SBCE network interfaces
Procedure
1. Log in to the Avaya SBCE web administration portal.
2. Navigate to Device Specific Settings > Network Management > Networks.
TLS client and server profiles setup
October 2018 Deploying the Avaya Aura
®
Web Gateway 141
Comments on this document? infodev@avaya.com