Avaya Aura - VMware deployments

VMware deployments
Deploy the Avaya Aura
®
Web Gateway OVA on a virtual machine using either vCenter or vSphere.
The components of the Avaya Aura
®
Web Gateway, Endpoint Service Gateway, and Unified Portal
are provided in a single OVA file.
The supported VMware ESXi versions for this deployment are 5.5, 6.0, and 6.5.
Obtaining the Avaya Aura
®
Web Gateway OVA file
Procedure
Do one of the following:
• Download the Avaya Aura
®
Web Gateway OVA from the Avaya Product Licensing and Delivery
System (Avaya PLDS) at
https://plds.avaya.com.
• Place an order for the DVDs containing the OVA file using the Material Code ID or description.
For more information about the material ID, see “Product Order Codes and Pricing” in Avaya
Aura
®
Web Gateway Offer Definition.
OVA deployment
Use one of the following procedures to deploy the OVA. You can use vCenter, vSphere, or
Solution Development Manager (SDM).
Deploying the Avaya Aura
®
Web Gateway OVA using vCenter
Procedure
1. Log in to vCenter.
2. Navigate to File > Deploy OVF Template.
3. From the Source page, click Browse and then select the OVA file.
For example, csa-<version>_OVF10.ova
4. Verify the information displayed in OVF Template Details and then click Next.
5. Review and accept the End User License Agreement (EULA) and then click Next.
6. From the Name and Location page, do the following:
a. Specify a name.
b. Select an inventory location or data store.
c. Click Next.
7. From the Deployment Configuration page, select a profile and then click Next.
VMware deployments
October 2018 Deploying the Avaya Aura
®
Web Gateway 43
Comments on this document? infodev@avaya.com