Avaya Aura - Chapter 8: System Manager, Avaya Aura Device Services, Media Server, and Avaya Equinox Conferencing configurations; Adding the Avaya Aura Web Gateway to System Manager

Chapter 8: System Manager, Avaya Aura
®
Device Services, Media Server,
and Avaya Equinox
Conferencing configurations
Adding the Avaya Aura
®
Web Gateway to System Manager
About this task
Use this procedure to enable SSO login and add the Avaya Aura
®
Web Gateway FQDN to the
System Manager web console.
Note:
To set up an Avaya Aura
®
Web Gateway cluster, use the front-end FQDN for the cluster. If you
are using an external oad balancer, the front-end FQDN for the cluster will be the FQDN of the
load balancer. If not, it will be the FQDN of the virtual IP assigned to the Avaya Aura
®
Web
Gateway cluster.
Before you begin
Ensure that you have administrative privileges to access System Manager.
For information about accessing System Manager, see Administering Avaya Aura
®
System
Manager.
Procedure
1. On the System Manager web console, click Services > Inventory.
2. In the left navigation pane, click Manage Elements.
3. On the Manage Elements page, click New.
The system displays the New Elements page.
4. In the General section, from Type, select Avaya Aura Web Gateway .
5. On the New Avaya Aura Web Gateway page, in the General section, provide the following
information:
• Name: Type a name for the element.
• Type: Retain the default setting of Avaya Aura Web Gateway.
October 2018 Deploying the Avaya Aura
®
Web Gateway 99
Comments on this document? infodev@avaya.com