Avaya Aura - Avaya Equinox Conferencing configuration for single FQDN deployments; Configuring Avaya Equinox conference control

4. In Host, provide the service FQDN.
For example: You can use webservices.company.com in a single FQDN deployment.
In a multiple FQDN deployment, use webgateway.company.com.
5. In Port, enter 443.
6. If you have any external clients, including WebRTC, mobile, or desktop clients outside the
enterprise firewall, do the following to enable a remote port:
a. Select the Enable port for remote access check box.
b. In Front-end port for remote access, enter a value between 1024 and 65535.
The default port value is 8444.
This port setting must be configured in the reverse proxy so traffic for clients outside the
firewall is translated from the front-end port to this remote access port.
7. If you are configuring a geographically distributed system, select the Enable use of an
external load balancer check box.
8. Click Save.
Related links
Geographical distribution overview on page 14
Avaya Equinox Conferencing configuration for single
FQDN deployments
Configuring Avaya Equinox
®
conference control
Procedure
1. Log in to the Avaya Equinox Management web administration portal.
2. Navigate to Settings > Advanced Parameters.
3. In Property Name, enter com.visionnex.vcms.core.uccp.customizedUCCPURL.
4. In Property Value, enter https://<Service FQDN>:443/uwd/ws?ticket=.
For example: https://webservices.company.com:443/uwd/ws?ticket=.
5. Click Apply.
Avaya Equinox Conferencing configuration for single FQDN deployments
October 2018 Deploying the Avaya Aura
®
Web Gateway 97
Comments on this document? infodev@avaya.com