Avaya Aura - Avaya Aura Web Gateway initial configuration settings; Front-end host, System Manager, and certificate configuration

12. From the main menu select Continue and then select Yes to restart services and apply the
changes.
Avaya Aura
®
Web Gateway initial configuration settings
The following sections describe the initial configuration settings for Avaya Aura
®
Web Gateway.
They also list the equivalent installation.properties file parameters for each setting for
silent installations. If you do not configure a setting during installation, you can configure it later.
You can update many of these settings anytime using the Avaya Aura
®
Web Gateway
administration portal as described in the “Avaya Aura
®
Web Gateway management with the
administration portal” chapter in Administering the Avaya Aura
®
Web Gateway.
Related links
Front-end host, System Manager, and certificate configuration on page 73
LDAP configuration on page 77
Cluster configuration on page 90
Virtual IP configuration options on page 91
Advanced configuration on page 93
Front-end host, System Manager, and certificate configuration
If you do not select the Front-end host, System Manager and Certificate Configuration option
during the installation, then the self-signed certificates are automatically generated. Self-signed
certificates are also generated when:
• The System Manager FQDN option is not set.
• The Use System Manager for certificates option is set to n and certificates were not
provided for one of the interfaces: REST, OAMP, SIP, or NODE.
You can modify certificate configuration settings from the administration portal anytime. This is
useful if you do not complete the certificate configuration as part of the initial setup process or if
you generate certificates at a later time.
For information about managing certificates through the Avaya Aura
®
Web Gateway administration
portal, see the managing certificates section in Administering the Avaya Aura
®
Web Gateway.
Caution:
If the system is using System Manager for certificates, then changing the System Manager
FQDN after installation will result in the regeneration of certificates. This might impact the
client and backend server communication with the Avaya Aura
®
Web Gateway.
Avaya Aura
®
Web Gateway initial configuration settings
October 2018 Deploying the Avaya Aura
®
Web Gateway 73
Comments on this document? infodev@avaya.com