Linux alias commands
Linux aliases are defined to make frequently used commands easier to use. When an alias is
available for the required operation, you can use the alias instead of typing a long path name and
using sudo. The path name specification and sudo invocation are built into the aliases that Avaya
provides.
Table 1: Three categories of aliases with their functionality description
Alias Description
cdto
Change to frequently used directories.
app
Perform application functions, such as install or backup.
svc
Manage the state of application related services.
Some of the alias commands are only available after the application has been installed.
You can type any of the aliases in a Linux shell to list the supported commands.
The following image provides an example of how the aliases are used:
Linux alias commands
October 2018 Deploying the Avaya Aura
®
Web Gateway 27
Comments on this document? infodev@avaya.com
To Next Page
Loading...
