Configuring Web Collaboration
Procedure
1. Log in to the Avaya Equinox Management web administration portal.
2. Navigate to Devices > Devices by Type > <Web Collaboration server name> >
Configuration.
3. Configure the following settings:
a. In Service FQDN and Local FQDN, enter the service FQDN that resolves to the IP
address of the selected Web Collaboration node.
For example: webconference1.company.com
b. In IP Address, enter the IP address that is resolved from the service and local
FQDNs.
c. In Public URL Branch, enter <Service FQDN>/<Web Collaboration
Services node prefix>.
For example: webservices.company.com/webconference1.
Note:
The public branch URL is used to support multiple Web Collaboration Services
nodes with a single public FQDN.
4. Repeat the previous steps for each Web Collaboration Services server that is part of the
deployment.
Global FQDN configuration
October 2018 Deploying the Avaya Aura
®
Web Gateway 98
Comments on this document? infodev@avaya.com
To Next Page
Loading...
