Avaya Aura - Chapter 1: Introduction; Purpose; Change history

Chapter 1: Introduction
Purpose
This document provides checklists and procedures for planning, installation, and configuration of
the Avaya Aura
®
Web Gateway. It is intended for customer installers and administrators.
Note:
This document does not describe SDK developer applications.
After you deploy Avaya Aura
®
Web Gateway, see Administering the Avaya Aura
®
Web Gateway
for administration and maintenance information.
Change history
This section describes the major changes made in this document:
Issue Date Summary of changes
Release 3.5,
Issue 1
October 2018 • Updated New in this release on page 11.
• Updated Avaya Aura Web Gateway overview on page 11.
• Updated the sections under Geographical distribution overview on
page 14.
• Updated Product compatibility on page 18.
• Added a new chapter: Deployment process on page 20.
• Updated Planning checklist on page 23.
• Replaced the required IP address information with Required
FQDNs and certificates on page 25.
• Added Performing a silent installation on page 67.
• Added Seed node replacement configuration on page 68.
• Updated Front-end host, System Manager, and certificate
configuration on page 73.
• Listed silent installation parameters in the sections under Avaya
Aura Web Gateway initial configuration settings on page 73.
October 2018 Deploying the Avaya Aura
®
Web Gateway 9
Comments on this document? infodev@avaya.com