Chapter 9: Avaya Session Border
Controller for Enterprise
configuration
Use the following sections to configure Avaya Session Border Controller for Enterprise (Avaya
SBCE) for the Avaya Aura
®
Web Gateway. You must have a pool of IP addresses available for
Avaya SBCE.
For more information about Avaya SBCE configuration, see Administering Avaya Session Border
Controller for Enterprise.
Related links
Required FQDNs and certificates on page 25
Avaya Session Border Controller for Enterprise
configuration checklist
Perform the tasks in this checklist to configure Avaya SBCE.
No.
Task Notes
1 Configure reverse proxy. • In a single FQDN for all services
deployment, complete the tasks
outlined in Reverse proxy configuration
checklist for a single FQDN
deployment on page 109.
• In a multiple FQDN deployment,
complete the tasks outlined in
Reverse
proxy configuration checklist for a
multiple FQDN deployment on
page 109.
2 If you are planning to use external
clients outside the enterprise firewall,
configure external client access.
Complete procedures in External client
access configuration on page 119.
October 2018 Deploying the Avaya Aura
®
Web Gateway 108
Comments on this document? infodev@avaya.com
To Next Page
