Avaya Aura - Page 24

No. Task Notes
Tip:
Configure your SSH tool to properly
see lines in the Avaya Aura
®
Web
Gateway configuration utility. For
example, in the PuTTY
Reconfiguration screen, navigate to
Window > Translation and do the
following:
- Set Remote character set to Use
font encoding.
- Select Use Unicode line drawing
code points.
3 Determine the structure of your
deployment. Deployment types are:
• A single FQDN with a single data
center.
• Multiple FQDNs with a single data
center.
• Multiple data centers.
Consider the following to determine which
deployment type you require:
• Do you want a single FQDN for all services
or a separate FQDN for each service? A
single FQDN has some restrictions and
requires internal traffic to be routed through
the reverse proxy. However, with a single
FQDN, you can use a single certificate for
all services.
• Does your system require a single data
center or multiple regionally-distributed data
centers?
4 Ensure that you can log in to the
Avaya Product Licensing and
Delivery System (PLDS) to
download software and to obtain
licences.
Ensure that you have access to PLDS and
can download files. Download the Avaya
Aura
®
Web Gateway installation file from
PLDS.
Avaya Aura
®
Web Gateway software and
enhanced user privileges are licensed
capabilities.
You can access PLDS at
http://
plds.avaya.com/.
5 Obtain the required IP addresses,
FQDNs, and certificates.
The IP addresses are used by the interfaces
of the different infrastructure components.
Certificates are required to ensure secure
interaction between solution components. For
more information, see Required FQDNs and
certificates on page 25.
6 If you are planning to deploy a
geographically distributed system,
See External load balancer requirements on
page 40.
Table continues…
Planning and preinstallation
October 2018 Deploying the Avaya Aura
®
Web Gateway 24
Comments on this document? infodev@avaya.com