Deploying a multi-node CloudFormation stack
About this task
Use multi-node CloudFormation to create a cluster.
Note:
You cannot expand an AWS single node into a AWS cluster. You must create AWS clusters
from the beginning. However, after an AWS cluster is created it can be expanded. For more
information, see Expanding an existing cluster on page 59.
Before you begin
• Use standard Amazon Web Services procedures to create the required network setup,
including Virtual Private Cloud (VPC) settings and Security Groups.
• Ensure that you have network access to the Amazon VPC before deploying an AMI.
• Create a multi-node CloudFormation template as described in
Creating CloudFormation
templates on page 52.
• Create and apply load balancer certificates. The ARN value created during the certificate
import is required for this procedure.
Procedure
1. Sign in to the Amazon Web Services Management console.
2. Navigate to Services > Management Tools > CloudFormation.
3. Click Create Stack.
The AWS EC2 Management console displays the first page of the Create stack wizard.
4. On the Select Template page, in the Choose a template area, click Choose File.
5. Select the multi-node yaml CloudFormation template file that you generated.
6. Click Next.
The system displays the Specify Details page.
7. In Stack name, type a name for the stack.
This stack name must match the stack name portion of the FQDN of the load balancer.
8. In Amazon Machine Image ID, type the Amazon Machine Image ID (AMI ID) of the image
that you imported.
For example, ami-fda9369d.
Tip:
You can obtain the AMI ID of an image from the EC2 AMI page. On a separate
browser tab, navigate to Services > EC2 > Images > AMIs.
9. In Network area, select the required Virtual Private Cloud.
Amazon Web Services deployments
October 2018 Deploying the Avaya Aura
®
Web Gateway 57
Comments on this document? infodev@avaya.com
To Next Page
Loading...
