Avaya Aura - Page 65

These are the default values.
To return to the previous menu, select Return to Main Menu and press Enter.
c. (Optional) In the Cassandra Encryption menu, enable SSL encryption to secure
Cassandra database communications between nodes in a cluster.
Important:
If you want to enable Cassandra internode encryption, you must enable it during
the initial installation. This setting cannot be changed after the initial installation.
4. Select Front-end host, System Manager and Certificate Configuration and do the
following:
a. For a standalone node, select Front-end IP or FQDN and enter the FQDN that clients
use to access services.
The default value is the FQDN assigned to the local server.
For a cluster deployment that uses the internal load balancer, you must configure
Front-end IP or FQDN as the FQDN corresponding to the virtual IP address of the
internal load balancer.
For a cluster deployment that uses an external load balancer, you must configure
Front-end IP or FQDN as the FQDN corresponding to the external load balancer.
b. Select System Manager FQDN and enter the FQDN of the Avaya Aura
®
System
Manager that signs the certificates for Avaya Aura
®
Web Gateway services.
c. (Optional) Select System Manager web admin username (o) and System
Manager web admin password and provide the credentials.
d. Select System Manager HTTPS Port and type the port for contacting the REST
interface of Avaya Aura
®
System Manager.
The default port is 443.
e. Select System Manager Enrollment Password and type the Avaya Aura
®
System
Manager enrollment password.
f. Select Keystore password and type a password to use for the local keystore.
Important:
You must remember the Keystore password for future references. You need this
password for any certificate management tasks.
g. Configure additional settings that are required for your system as described in Front-
end host, System Manager, and certificate configuration on page 73.
To return to the previous menu, select Return to Main Menu and press Enter.
5. Select Deployment settings and then press the Spacebar to select the deployment
option that corresponds to the solution that you are installing.
If you have conferencing in your solution, then select Team Engagement + Conferencing.
Otherwise, you must select Team Engagement. Do not select Conferencing only.
Installing the Avaya Aura
®
Web Gateway
October 2018 Deploying the Avaya Aura
®
Web Gateway 65
Comments on this document? infodev@avaya.com