Avaya Aura - Page 70

e. To save the changes on the system, select Apply and then select Continue.
f. Select Return to Main Menu and press Enter.
4. In the Cassandra Encryption menu, enable SSL encryption to secure Cassandra
database communications between nodes in a cluster.
Important:
If you want to enable Cassandra internode encryption, you must do so during the initial
installation. This setting cannot be changed after the initial installation.
5. Select Front-end host, System Manager and Certificate Configuration and do the
following:
a. Select System Manager FQDN and enter the FQDN of the Avaya Aura
®
System
Manager that signs the certificates for Avaya Aura
®
Web Gateway services.
b. (Optional) Select System Manager web admin username (o) and System
Manager web admin password and provide the credentials.
c. Select System Manager HTTPS Port and type the port for contacting Avaya Aura
®
System Manager.
The default port is 443.
d. Select System Manager Enrollment Password and type the Avaya Aura
®
System
Manager enrollment password.
e. Select Keystore password and type a password for using the local keystore.
The keystore password on additional nodes should match the keystore password for
the initial node.
Important:
You must remember the keystore password for future reference. You need this
password for other certificate management tasks.
f. Configure additional settings that are required for your system as described in Front-
end host, System Manager, and certificate configuration on page 73.
To return to the previous menu, select Return to Main Menu and press Enter.
6. Select Deployment settings and then press the Spacebar to select the deployment
option that corresponds to the solution that you are installing.
You must configure the same deployment type that you configured on the initial node.
If you have conferencing in your solution, then select Team Engagement + Conferencing.
Otherwise, you must select Team Engagement. Do not select Conferencing only.
7. To review the settings, select Continue and then select Accept and continue.
The system runs pre-install configuration checks.
8. To install the software, select Continue and then accept the license agreement.
Wait for several minutes while the installation proceeds.
Avaya Aura
®
Web Gateway setup
October 2018 Deploying the Avaya Aura
®
Web Gateway 70
Comments on this document? infodev@avaya.com