• When the mouse pointer is active, a fixed blue led light is on and the remote-control will
transmit all its movements to the device, causing a faster discharge of the batteries. It is
strongly suggested to disable the mouse pointer when not using it.
Using an External Keyboard/Mouse
Please note that you can also connect to your Avaya CU360 unit a standard keyboard and/or
mouse, adding external hardware through the USB interface or through Bluetooth connections.
Having an external keyboard attached to your unit makes it easier to type and to access menus.
You can use a keyboard including a mousepad or add an external independent mouse device.
When you connect an external keyboard to your unit, you should set the keyboard layout for the
attached physical keyboard. Setting a correct keyboard layout is necessary for typing correctly in
word processing applications, etc.
To setup or change the keyboard layout for an external keyboard in Android:
• Open OS Settings > System >Language & Input section in Android Settings.
• On the Language & Input screen tap on Physical Keyboard. A list of physical keyboards (and
Touch screens) is displayed.
• Press on the name of your physical keyboard.
• A whole list of keyboard layouts will be displayed. From here, you can choose the keyboard
layout that corresponds to your physical keyboard.
• You can also configure the unit to hide the virtual keyboard on screen when a physical
keyboard is present.
Figure 10: Compatible Keyboard with Mouse Pad
• Important
• A keyboard named “Avaya Remote-controller” is the physical keyboard of the remote-
control. Its input layout must not be changed (default is English (US) - Android), otherwise
the remote-control will not work properly.
Using a Touch Screen Monitor
In addition to the supplied remote-control, you can operate the Avaya CU360 with a standard
touch screen display. The display only needs to be connected through HDMI and the USB
interface to the device.
Having a touch screen display attached to your Avaya CU360 makes it easier to type using the
virtual keyboard (visible on the screen by tapping on any edit field) and to access the menu.
When you connect a touch screen display to your Avaya CU360, please assure that a standard
“multitouch touch screen” display or monitor supporting Android 7 via USB is used.
• Tips
• When using a touch screen monitor, you can navigate back to previous page in the
CU360 app by touching any “empty” portion of the page with two fingers.
To Next Page
Loading...
