Avaya CU360 - Software Upgrade Methods; Upgrade via USB key - Automatic Mode; Upgrade via Web - Automatic Mode

© 2021 Avaya Inc. All rights reserved
Release Notes for Avaya Collaboration Unit CU360 What’s New 73
Figure 82: Change Layout via the Floating Bar Button
You can also press the “Change Layout” key on the remote-control to change the layout.
Figure 83: Change Layout via Remote-Control Key
Enhancements
Several enhancements are present in this release.
Web Interface
• The home page now displays the Spaces QRCode and the verification code
• It is now possible to choose the application to launch at start-up
• All the favorite contacts can now be removed at once
• It is possible to check the OS version and the amount of memory.
Misc
• Optimized the management of common CA Certificates
• Changed the LEDs when streaming (same as when calling) and when USB Mode is active
• Support of 720p30 fps for USB cameras
• Immediate refresh of the Web Collab content when a message box is dismissed or the page is
reloaded
Control API Extension (AT Commands)
AT commands can be used to control XT Series or CU360 devices.
For full documentation, refer to https://support.avaya.com/downloads/download-
details.action?contentId=C20143693548450_0&productId=P1430