Avaya CU360 - Pexip Provisioning; How to Associate Your Endpoint to a Pexip Subscription

© 2021 Avaya Inc. All rights reserved
Release Notes for Avaya Collaboration Unit CU360 What’s New 67
Table 2: Icons Explained
You see this icon
when:
Spaces Feature
Prevent Unmute = OFF
Spaces Feature
Prevent Unmute = ON
CU360
Available Actions
• You are unmuted
• The admin did not mute you. You
are unmuted.
• The admin muted you (or all); you
raised your hand, you were
allowed to speak, and you
unmuted yourself.
You can mute yourself by pressing the
icon, selecting “Mute”, or pressing the
“Mute” key on the remote-control
• Not applicable
• The admin muted you (or all); you
are muted.
You can raise your hand by pressing
the icon, selecting “Raise Hand” or
pressing the “Mute” key on the
remote-control
• Not applicable
• The admin muted you (or all); you
are muted. You raised your hand
to ask the admin the permission to
speak.
• The request has not been granted
or denied yet.
You can lower your hand by pressing
the icon, selecting “Lower Hand” or
pressing the “Mute” key on the
remote-control
• You are muted
• The admin did not mute you, but
you muted yourself.
• The admin muted you (or all); you
raised you hand, you were allowed
to speak. You can unmute yourself
You can unmute yourself by pressing
the icon, selecting “Mute”, or pressing
the “Mute” key on the remote-control
• Important
• Raise Hand is supported in the Spaces App, via interface and also via the
remote-control.
Pexip Provisioning
In this release it is possible to associate the device with a Pexip account, to automatically receive
the configuration for the device.
If you have a valid subscription with Pexip and you tied your Avaya device to this subscription, the
device can automatically connect to the Pexip SIP Cloud Service to be provisioned.
Therefore, the device will be:
- SIP registered to the Pexip SIP cloud service,
- able to both make and receive SIP calls,
- able to automatically receive the list of Contacts from the Pexip Cloud service (LDAP directory).
See also https://www.pexip.com/video-conferencing-infrastructure, Infrastructure-as-a-service with
Pexip Service endpoint subscriptions
How to Associate Your Endpoint to a Pexip Subscription
The Pexip Provisioning method supported in this release is based on tying your Avaya endpoint to
your existing Pexip subscription using the “Serial Number” of your endpoint.
You can retrieve the Serial Number of your Avaya endpoint in the external case label, or
navigating to
[GUI] CONFIGURE > ABOUT> SERIAL NUMBER
[WEB] [ADMIN LOGIN] HOME PAGES>SERIAL NUMBER