• Using the Web Client, go to Administrator Settings > Utilities > Software Update and
press Next
• Browse for the file (.exe) saved locally on your computer and upload it to the web
browser. Once uploaded press Upload-Install.
• The file will be uploaded to your unit (Status percentage shows how many bytes have
been transferred) and then installed.
• Follow the progress of the update on the web browser. At the end of the installation the
web client might disconnect. Wait automatic reconnection or press F5. You might need to
login again.
Figure 21: Software Upgrade via Web – Choose Upgrade Package
Figure 22: Software Upgrade via Web – Choose Upgrade Package
Upgrade via Equinox Management – Automatic Mode
• Your CU must be added as managed endpoint in Equinox Management
• (Requires Equinox Management 9.1.0.365 or later)
To Next Page
Loading...
