The floating dock bar can be moved to a different place on the screen, docked to a side or with a
free position. The last position of the floating bar is restored when the app restarts (unless the app
is restored to factory settings)
In this release, a disconnect icon is available on the floating bar to quickly disconnect a call.
Figure 88: Application Floating Dock Bar when not in a call
Figure 89: Application Floating Dock Bar when in a call
• Important
• The floating dock bar could disappear when the screen is split and the CU360 App does
not have the input focus. In this case just click on the app portion of the split screen to
restore the bar.
Remove the Floating Dock Bar
The CU360 App floating dock bar can be removed if you prefer to use the remote-control to
perform the actions accessible from the dock bar.
[WEB] [ADMIN LOGIN] ADMINISTRATOR SETTINGS> SYSTEM > CUSTOMIZATION
[GUI] CONFIGURE > ADVANCED > SYSTEM > CUSTOMIZATION
• Hide Floating Bar: option to hide the movable floating bar from the CU360 app.
Figure 90: Hide the Floating Bar
• When the floating bar is hidden, the Mute/DND/Volume/Privacy are available on the Top
Info Bar and you can exit from a page by touching with two fingers in an empty area of the
UX or right clicking with a mouse. To insert DTMF tones, use the remote-control
keyboard.
• The icon for the audio activated tracking camera is always visible. The tracking cannot be
activated when the device is muted or in video privacy mode.
Figure 91: Icons on the Info Bar
How to Present Locally or Share Content while in a Meeting
There are several ways to show a computer (or other device) content on the CU360 screen locally
(local presentation mode) or share it to remote parties while in a call.
In a call, you can also share other applications running on the CU360 device (Split&Share).
The available ways are described in this section.
To Next Page
Loading...
