• From the web interface, click on the green icon in the home page.
• By pressing Install there is no progress, and the web session will disconnect. Please wait
a few minutes before reconnecting.
• Important
• If you set a password for the download, the OTA upgrade will fail.
Upgrade via PC – Interactive mode
• Save the CU-360_Vx_y_z.exe file containing the software package in your Windows PC
• Verify that the PC is connected to the network in wired mode (otherwise the upgrade
process can be very slow when using a wireless connection) and that it can ping the
codec unit. It is strongly suggested to upgrade the codec unit when it is connected to the
Ethernet.
• Double click the software package .exe file. Below application will be launched.
• Accept the usage agreement
• Insert IP address of the codec unit to upgrade in the Codec Unit IP address field.
• Press “Start” button in the app.
To Next Page
Loading...
