[WEB] ADMINISTRATOR SETTINGS
refer to the Web interface menu.
The CU360 Web portal is based on real-time, two-way connections, employing push technology
over web sockets, where both the client and server can initiate communication, allowing them to
exchange data freely and quickly (no polling, no delay).
Figure 2: Login to the CU360 Web Interface
• Important
• See the Known Issue section for a limitation about using the web interface with iOS
mobile devices.
• Important
• You need to press the 'Save' button to apply changes done to a configuration via the web
interface, otherwise your changes will not be applied.
Figure 3: Press Save to Change Settings in the Web Interface
• Important
• The Web Server for the CU360 unit is implemented by an application named jsweb which
is automatically launched at system start-up. Do not terminate the app.
Connecting the Unit and Quick Setup
Please refer to the quick setup guide for a detailed setup description in a standard huddle room
scenario.
Figure 4: CU360 Unboxing
To Next Page
Loading...
