Figure 65: Available Layouts for Single Monitor Scenario, GUI
Figure 66: Available layouts for Dual Monitor Scenario, Web > More Options > Layouts
The current layout can be changed as explained above, and the default one will be restored
automatically when the number of available video flows changes (typically presentation on/off).
To change this behavior, you can configure the endpoint to “remember” the favorite layout for
each video combination, per call or always. See “Remember Favorite Layouts” in CU360
documentation.
The monitor scenario setting is available at
[GUI] CONFIGURE > ADVANCED > I/O CONNECTIONS> MONITORS>GENERAL
[WEB] [ADMIN LOGIN] ADMINISTRATOR SETTINGS> I/O CONNECTIONS> MONITORS>GENERAL
• Number of Monitors: Auto*/HD1/HD1(Menu & Present.) + HD2 (Video Rx)
It is strongly suggested to keep the number of monitors to Auto. Do not plug the additional
monitor if you need the device to work with a single monitor.
Figure 67:
I/O Connections > Monitors Settings
To Next Page
Loading...
