Figure 76: Pexip Provisioning in the Quick Setup > Pexip Subscription
Press “Activate” to activate your subscription. If you have a valid subscription with Pexip, your
device will be automatically configured to connect to the Pexip Cloud Service as SIP endpoint.
Otherwise the result will be “Subscription not available”.
The device will also automatically receive the list of Contacts from the service (LDAP directory).
Figure 77: Pexip Provisioning Activation
Once provisioned by Pexip, you can verify the device status and check last time the configuration
was updated.
[GUI] CONFIGURE > SYSTEM STATUS
[WEB] [ADMIN LOGIN] HOME PAGE
If the Automatic Synchronization is enabled, the provisioned parameters will be updated every
switch-on and then periodically, according to the time interval provided by the Pexip Server
To Next Page
Loading...
